2-4S 480A/80A Bushed ESC + 550 Brushed Mount for RC Boat Tug Bait MOMO Yacht Marine
-- Description -- Motor:
This brush motor mode of multipolar internal rotor winding,front ball bearing. Strong torque,low noise.linear more exquisite. Built-in cooling fan, outside degaussing sets. 480A/80A Bushed ESC: This ESC has three modes, can be set to "Forward/brake/reverse" mode, "Forward/reverse" mode and "Forward/brake" mode, very convenience to switch the mode. The forward/brake/reverse mode adopts "double click" operating method. Mutiple protection features: Low voltage cut-off protection, over-heat protection, throttle signal loss protection Fully waterproof and dustproof Tips: The plug must be pulled out first to switch mode, to switch mode is not valid when power is on. Return to the neutral point fanction in RC controller is necessary at "Forward/brake/reverse mode" and "Forward/reverse mode",Throttle rocker must be returned to the neutral point before power on the ESC.
-- Specification & Features -- 550 Brush Motor: * Voltage range: 6-18v * Motor shaft diameter: 3.175mm D-type cutting edge axis * Motor shaft length: 9mm * Motor outer diameter: 36mm * Motor length: 61mm * Mounting hole: distance 25mm, 3mm screw hole * With 4mm banana connector
* Weight: 217g * The following parameters are measured at 7.4V: No-load speed: 10400 r / min, No-load current: 1A, Maximum efficacy: efficacy of 71% General load: torque 42.441mN-m, speed 8984RPM/MIN, current 6.3A, power 32.41W The maximum load: torque 155.842mN-M, speed: 5465RPM/MIN, current 19.62A, power 68.88W 480A/80A Bushed ESC: * Plug: T-Plug available * Input: 2-4S Lipo or 5-12 NiMH battery * BEC: 6V/3A * Continuous current: 80A * Transient current: 480A * Reverse Continuous current: 60A * Reverse Transient current: 300A * Size: 42x28x36mm * Weight: 62g * Suitable for 540/550/775 Brush motors Motor Mount: * Material: Alloy Aluminum and glass fiber * Comes with water cooling mount plate * Weight: 55g * Mount Hole Distance: 25mm * Water Cooling Nipple Size: OD:5mm, ID:2.5mm, Height:13mm * Mounting Plate Thickness:6mm * Motor Mounting Screws: M3*10mm (2PCS) Water Cooling jacket: * Material: Brass * Brass Tube Diamter: 4mm(OD), 3mm(ID)
-- Item Contains -- 1 set of 6-18V 550 DC Motor + 480A/80A Bushed ESC + Motor Mount Holder + Water Cooling Jacket
★
Payment We only accept PayPal. Payment must be made within 7 calendar days of the auction end time.
✈
Shipping US usually takes about 7-14 days. Other countries usually takes about 20-35 business days. If you want the items are shipped by Expedited Shipping (such as DHL,UPS,EMS,Fedex),please choose the Expedited Shipping or contact me. It maybe delay for hot sales season,Strike,bad weather,and so on. It will take more time to ship to some countries. Thank you for understanding!
▶
Return Policies You get 3 month guarantee, and 14 days return policy after get the item, Always buy from me with confidence! If you receive a unsatisfactory item or don't arrive in time. please send us a message via ebay. We promise to give you a satisfactory solution in one working day. Please contact us before you return it (Please do not open return case,we will try our best to solve your problems,thanks)
☏
CONTACT US Because of the time difference, our work time is according to Beijing time (GMT +8:00). 9:00am to 5:00pm Monday to Friday I am ready and eager to answer your question at first time,We apologize for the late reply during the holidays.
Returns Accepted for this item if it's within 30 Days